Evaluate TC-DCU-1600 dry cooling against the coolant temperature required by your AU/NZ project. Confirm ambient conditions, fan operation and site electrical demand before procurement.
TC-DCU-1600 lists 1600 kW, 4000 L/min and a 35/41.5°C liquid temperature pair. Compared with DCU-2000, it has the same listed envelope but a different temperature reference. Compare selected duties at common ambient and fluid conditions, not model numbers alone.
A lower required leaving-liquid temperature can be more restrictive during hot weather even when the heat load is lower. Confirm which side of the 35/41.5°C pair is the unit inlet and outlet, then specify the maximum permitted supply temperature to the downstream equipment. The catalogue does not establish that temperature under every outdoor condition.
The 540,000 m³/h airflow, less than 90 kW power and 8500 kg mass entries need a defined basis. Ask for operating electrical demand and sound data at the selected fan speed and thermal duty. Do not use the power limit as an annual energy prediction or the N+1 fan entry as proof of full-load capacity with a fan unavailable.
| Parameter | Catalogue reference |
|---|---|
| Model | TC-DCU-1600 |
| Equipment type | Integrated Dry Cooling Unit |
| Catalogue capacity | 1600 kW |
| Flow reference | 4000 L/min |
| Flow adjustment range | 40–100% |
| Head reference — confirm at required flow | 35 m |
| Power consumption reference | < 90 kW |
| Catalogue electrical supply | 3-ph AC 380 V 50/60 Hz or 480 V 60 Hz |
| External dimensions | 13300 × 2280 × 2535 mm |
| Catalogue mass | 8500 kg |
| Pump arrangement | 1+1 |
| Connection nominal size — standard to confirm | DN200 |
| Airflow reference | 540,000 m³/h |
| Liquid-side pressure-drop reference | < 1.5 bar |
| Fan arrangement | N+1 |
| Condition | Reference / action |
|---|---|
| Liquid temperature pair — direction to confirm | 35 °C / 41.5 °C |
| Outdoor operating-envelope reference | −30 to 45 °C, 5–90 % RH |
| Thermal selection | Confirm outdoor design point, fluid and fan operation |
Source: the linked ToneCooling TC-DCU-1600 model datasheet, as transcribed in the supplied catalogue material. Values are not independently verified performance or a guarantee that all fields apply at one simultaneous operating point. Confirm the document revision, fluid, temperatures, measurement boundaries, dimension orientation and mass basis in the accepted selection.
DCU-1600 lists a 13300 mm first envelope dimension and 540,000 m³/h airflow; DCU-1000 lists 6600 mm and 300,000 m³/h. Check the required heat duty first, then compare airflow clearances, service access and installation cost on a common selected-duty basis.
Comparison uses the catalogue references listed on the dry cooling unit series page and its linked model datasheets. Figures are not a project performance guarantee. Confirm controlled document revisions before procurement.
Use this model-specific PDF for initial comparison. Request the controlled drawing and configuration-specific duty confirmation for procurement.
Download TC-DCU-1600 PDFFree PDF · no form required. The series photograph is not a certified arrangement drawing.
List the equipment, connections, controls, sensors and accessories included in the offer. Assign installation, flushing, filling, electrical connection and commissioning to named project parties. Local enquiry support does not imply local stock, an included service contract or on-site installation.
Request the offered electrical schedule and applicable conformity documents for your Australian or New Zealand site. Catalogue voltage, pump count and fan arrangement do not independently establish compliance or the required retained duty during a fault.
Send the conditions below for a configuration-specific offer, including quantity and delivery destination.
Prepare my enquiry by emailOpens an editable email checklist; nothing is sent automatically. NDA arrangements can be agreed before confidential drawings are shared.
ToneCooling Australia Pty Ltd coordinates Australian and New Zealand enquiries; manufacturing is in Huizhou, Guangdong, China. Currency, freight, delivery schedule and included inspection documents are confirmed in the quotation.
No. Their listed fluid temperature pairs differ. Request selections at the same ambient, fluid mixture, temperatures and permitted fan operating case.
Other dry coolers models
Data centre liquid cooling
